Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Brushy Creek, TX | CleanRun Air Duct Cleaning Round Rock
Air Duct Cleaning in Brushy Creek for Trane systems typically runs $380-$620 for a whole-home system, with flex duct repair or evaporator coil cleaning added separately. We’re an independent Trane service provider - not authorized or affiliated with Trane - and we’ve cleaned, sealed, and repaired thousands of Trane residential duct systems across Brushy Creek since 2013. Our crews carry OEM-equivalent Trane-compatible flex duct, mastic, and boot collars on every truck, and every job starts with a written price before a single panel comes off. Call (737) 259-5752 for a free estimate.
Why Brushy Creek Residents Choose Us for Trane Service
Brushy Creek’s housing stock is almost entirely builder-spec construction from the mid-1990s through mid-2000s, and Trane was the HVAC brand of choice for many of those developments. We’ve worked on enough of them to know the patterns: XR13 and XR14 condensers paired with builder-grade flex duct routed through attics that hit 140°F by July. The equipment itself often outlasts the ductwork it was connected to.
Tomas Reyes, our owner, grew up in Queens apartment buildings with ancient ductwork and picked up the fundamentals at Queensborough Community College before spending two decades doing hands-on air duct work. He and our crew have served Brushy Creek for years, including jobs in the Stone Oak Ranch and Teravista neighborhoods where cedar pollen and construction dust have a way of turning return plenums into something you’d rather not breathe. The camera goes in first. Then we talk.
We document everything. Every duct run photographed before and after. Every price written before work starts, per Haven Standard Clause 1. Our technicians are background-checked, uniformed, and identified by name before arrival - Haven Standard Clause 3: Verified Crews. You can look up our equipment roster yourself: Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman.
Common Trane Air Duct Cleaning Problems We Solve in Brushy Creek
- Sagged and torn flex duct at Trane plenum takeoffs. Builder-grade flex duct connected to Trane air handlers in Brushy Creek’s 130-150°F attics loses its structural integrity after 20-30 years. The inner liner tears at the plenum connection, so the blower pulls attic dust and fiberglass insulation into your supply stream instead of delivering conditioned air to your rooms. We see this on XR13 and XR14 systems weekly.
- Separated mastic-sealed boots at Trane supply registers. The mastic used in 1990s Brushy Creek construction embrittles with decades of heat cycling. Boots pull away from drywall or subfloor, leaking conditioned air into wall cavities and drawing Ashe juniper pollen through the gaps during December through February pollen events. Your filter never sees that particulate - it enters downstream.
- Fiberglass duct board erosion in Trane return systems. Older Trane XB and XR furnace installations used fiberglass duct board returns that erode internally under Central Texas heat. Glass fibers release into the airstream, coat the evaporator coil, and restrict the condenser’s heat exchange. The coil cleaning we perform removes this buildup; the duct board itself often needs replacement.
- Microbial growth on flex-duct inner liners near the greenbelt corridor. The Brushy Creek greenbelt raises localized humidity in adjacent neighborhoods. Condensation cycles on Trane supply boots promote mold and mildew growth on flex-duct inner liners - a pattern our technicians find less often in drier subdivisions west toward Cedar Park’s higher-elevation terrain. Video inspection reveals this before any work is priced.
- Debris-choked evaporator coils from pollen and construction dust. Brushy Creek’s position at the Edwards Plateau transition means Ashe juniper pollen is fine enough to bypass standard return filters. Combined with residual construction dust from the 1990s-2000s building boom, this loads Trane evaporator coils with a sticky, restrictive mat that reduces efficiency and can freeze the coil.
BeforeAfterTrane Service in Brushy Creek: What Local Conditions Mean for Your Equipment
Brushy Creek’s 1990s-2000s Trane systems were commonly installed with flex duct that has now reached the end of its service life, and the combination of 140°F+ attic temperatures and winter Ashe juniper pollen means the inner liners are both physically degraded and biologically loaded - a dual failure mode rarely seen in newer or drier Central Texas markets.
Here’s what that looks like in practice. The heat breaks down the polyethylene inner liner and the adhesive bonding the insulation wrap. Simultaneously, pollen particulates fine enough to pass through 1-inch return filters embed in the degraded liner surface, creating a nutrient layer for microbial growth once summer humidity spikes. In homes off Brushy Creek Road and throughout the greenbelt corridor, we’ve pulled flex duct runs where the inner liner had torn completely free of the wire helix, collapsing into the airstream like a deflated balloon. The Trane blower doesn’t know the duct is compromised - it just works harder, draws more amperage, and shortens its own lifespan.
This is why we run a video camera through every main trunk line before quoting. What looks like “fine” from a register opening often reveals a very different story six feet upstream. Our Trane sales & service approach is built on what the camera shows, not what a checklist assumes.
Trane Models & Products We Service in Brushy Creek
We regularly clean, repair, and seal ductwork connected to Trane XR Series (XR13, XR14, XR16), Trane XB Series (XB13, XB14), Trane XR95 and XR80 gas furnaces, and Trane XV Series variable-speed air handlers. These were the workhorse lines installed during Brushy Creek’s suburban boom, and they’re still running in hundreds of local homes.
Our trucks stock OEM-equivalent Trane-compatible flex duct, mastic, and boot collars for same-visit repairs when possible. If a component meets or exceeds manufacturer specifications and costs less without compromising longevity, we’ll present that aftermarket option with the specification sheet - Haven Standard Clause 1 applies to parts selection too. We don’t automatically default to the most expensive option, and we don’t pad invoices with OEM markup when equivalent quality exists. If your Trane system’s ductwork is too far gone for economical repair, we’ll say so. Repeatedly patching failing flex runs wastes your money and our time.
Trane Service Pricing in Brushy Creek
Whole-home Trane air duct cleaning in Brushy Creek runs $380-$620 for a typical single-system residence. This covers negative-pressure extraction through every duct run, register and boot cleaning, and the Documented Photo Record delivered as a standard job record.
Additional line items, when needed:
- Flex duct repair or replacement: $180-$340 per run, depending on length and attic access
- Evaporator coil cleaning: $240-$380
- Duct sealing with mastic and collar replacement: $150-$280 per boot
- Video inspection (standalone or diagnostic): included free with any cleaning or repair quote
What drives cost? Attic accessibility, number of duct runs, degree of debris or microbial buildup, and whether the Trane system’s original flex duct requires partial replacement. Every price is written before work starts - no exceptions. We don’t do “call for a quote” because Haven Standard Clause 1 requires a written price delivered before any work begins. Call (737) 259-5752 for a free estimate; we’ll run the camera and put a number in writing while we’re still on site.
Serving Brushy Creek, TX - Our Local Coverage Area
We’re based in the Brushy Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in Brushy Creek
Yes. Ownership history doesn’t change the condition of your ductwork, and we’re an independent service provider - not a Trane-authorized dealer with franchise restrictions on who we can work for. We service Trane systems in Brushy Creek regardless of how many times the home has changed hands. Call (737) 259-5752 to schedule a free video inspection.
Visible registers don’t show the full picture. A 1999 Trane system in Brushy Creek has flex duct that has endured 25+ years of 140°F attic heat, and the inner liner degradation happens where you can’t see it - at plenum takeoffs, along attic runs, and at boot connections behind drywall. We recently serviced a 1998-built home off Brushy Creek Road with a Trane XR13 system where the homeowner complained of musty odors and uneven cooling. Our video inspection showed torn flex duct inner liners and microbial growth on the supply boots near the greenbelt corridor. We replaced the damaged runs, re-sealed the boots with mastic, cleaned the evaporator coil, and restored balanced airflow - the homeowner noticed immediate relief from both the odor and the hot-room complaints. The camera goes in first. Then we talk.
Ashe juniper pollen peaks December through February and produces particulates fine enough to bypass standard 1-inch return filters. In Brushy Creek, this pollen coats duct interiors, embeds in degraded flex-duct liners, and creates a biological loading that microbial growth feeds on once humidity rises. Trane systems with intact ductwork and proper sealing handle this better; systems with separated boots or torn flex duct pull pollen directly into living spaces through gaps the filter never protects. Cleaning removes accumulated pollen loads; repair seals the entry points. Call (737) 259-5752 for an inspection before next pollen season.
Often, yes - if the tear is localized and the surrounding duct is structurally sound. We use OEM-equivalent Trane-compatible flex duct and mastic for repairs, and we’ll splice in replacement sections rather than replacing entire runs when it makes sense. But if the inner liner is degraded throughout the run or multiple failures exist, partial replacement becomes the more durable option. We give an honest repair-vs-replace assessment; if repeatedly patching the same failing flex runs is the only alternative to full replacement, we’ll tell you. Haven Standard Clause 1: written price for either option, your choice.
Evaporator coil cleaning is a separate service, not bundled into standard duct cleaning. Trane coils in Brushy Creek accumulate pollen, construction dust, and fiberglass fibers from degraded duct board returns - a restrictive mat that reduces efficiency and can cause freeze-ups. We clean coils with professional-grade equipment and include before-and-after photos in the Documented Photo Record. Coil cleaning adds $240-$380 to the job. Call (737) 259-5752 for a combined quote.
Service Areas Near Brushy Creek
We serve Brushy Creek and surrounding communities from our Round Rock base. Our crews regularly work in Trane service in Wells Branch, Pflugerville, Hutto, Jollyville, and Trane service in Round Rock. The same standards apply: written price first, camera inspection, documented photo record, 365-Day Done Right Promise.
Book Your Trane Service in Brushy Creek Today
Call (737) 259-5752 to speak with a live person - no phone tree, no callback request. We’ll schedule a free video inspection, show you what your Trane ductwork actually looks like, and put a written price in your hand before any work begins. Every job is backed by our 365-Day Done Right Promise and the full H.A.V.E.N. Standard.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Round Rock, serving Brushy Creek since 2013.