Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Round Rock, TX | CleanRun Air Duct Cleaning Round Rock
Trane air duct cleaning in Round Rock typically runs $380-$620 for a complete system, and every job starts with a written price before we touch a single panel. We’re CleanRun Air Duct Cleaning - Round Rock, an independent Trane service provider - not manufacturer-authorized - and we’ve spent years tracing the specific ways Trane systems fail in this city’s Dell-boom housing stock. Call (737) 259-5752 for a free estimate with documented photo inspection included.
Why Round Rock Residents Choose Us for Trane Service
We see the same Trane systems week after week across Round Rock. The XR14 still running in a Forest Creek garage. The XB13 that came with a Teravista build in 2005. The XV18 somebody upgraded to after fighting with their builder-grade unit for a decade. Trane sales & service isn’t a sideline for us - it’s what we do when the camera shows a coil matted with cedar pollen or a plenum collar that’s been leaking attic air since the Bush administration.
Tomas Reyes, our owner, grew up in Queens apartment buildings with ductwork old enough to vote. He learned HVAC fundamentals at Queensborough Community College, then spent two decades doing the work that textbooks describe but never prepare you for. In Round Rock, that means knowing why a Trane air handler in a Walsh Ranch attic fails differently than the same model in a Georgetown closet. His rule for every job: “The camera goes in first. Then we talk.” We run a video scope through every main trunk line before quoting. You see what we see. Then we discuss what actually needs fixing.
Because we’re independent, we don’t answer to Trane corporate quotas. We answer to the photo record and the written price on your invoice. Haven Standard Clause 1: written price before any work starts, every time, no exceptions. Haven Standard Clause 3: Verified Crews - background-checked, uniformed, identified by name before arrival.
Common Trane Air Duct Cleaning Problems We Solve in Round Rock
- Cabinet panel seal failure on attic-mounted Trane air handlers. Trane systems in the Walsh Ranch and Forest Creek subdivisions were almost all installed with the air handler in the attic, not a closet. After 15-25 years of thermal cycling in 140°F+ Round Rock attics, the cabinet panel gaskets harden and crack. The return side pulls unfiltered attic air - and the cedar pollen that collects there - straight into your living space. We replace OEM door gaskets and mastic-seal the cabinet.
- Evaporator coils matted with mountain cedar biofilm. Trane’s all-aluminum evaporator coils catch the extreme pollen load that blows through Round Rock each December-February. We routinely pull coils coated in gray-green biofilm that restricts airflow and forces the compressor to run longer. Our coil cleaning uses professional-grade foaming agents from Abatement Technologies, with before-and-after photos of your specific coil.
- Flex duct separation at Trane supply plenums. In east Round Rock’s Dell-boom subdivisions, flex duct connected to Trane supply plenums regularly sags, tears, or pulls off the boot collar after years of superheated attic exposure. Conditioned air dumps into the attic. Attic dust gets drawn into the supply side. We reattach with mastic-sealed collars and replace crushed runs with quality aftermarket flex duct rated for Central Texas attic temperatures.
- Condenser coils clogged with juniper and cottonwood debris. Trane XR and XB condensers sitting on the sunny side of a Round Rock slab accumulate debris in the coil fins, raising head pressure and shortening compressor life. We clean the condenser as part of full system service, but we also show you the photo so you understand why it’s happening.
- Static pressure problems from collapsed flex runs. The 1998-2008 builder-grade flex duct in Round Rock’s tract homes wasn’t designed for two decades of 140°F+ attic baking. Collapsed or kinked flex runs force Trane air handlers to work against restricted airflow, burning out blower motors and failing to hold setpoint upstairs. We measure static pressure before and after repair, and we show you the numbers.
BeforeAfterTrane Service in Round Rock: What Local Conditions Mean for Your Equipment
Round Rock sits on the eastern edge of the Balcones Escarpment, square in Central Texas’s mountain cedar pollen corridor. The December-February “cedar fever” season delivers some of the highest airborne allergen concentrations in the country. Meanwhile, the city’s Dell Technologies-era development boom packed it with builder-grade flexible ductwork that’s now spent 15-25 years baking in attics that routinely hit 140°F+.
This combination is specific to Round Rock. Georgetown sits farther from the escarpment’s pollen funnel. Pflugerville’s housing stock skews newer. But in Round Rock’s Dell-boom subdivisions - Forest Creek, Teravista, the Walsh Ranch area - you’ve got aging flex duct simultaneously failing from heat degradation while Trane air handlers draw in record pollen loads through compromised cabinet seals. The result is a cohort of duct systems aging out of effective service life right now, and Trane owners who can’t figure out why their filters clog in two weeks every January.
We were called to a 2003 two-story in Forest Creek where the homeowner’s Trane XR14 couldn’t keep up upstairs and the filter was loading up in two weeks. Video inspection showed the main trunk flex had pulled off the plenum collar and was sagging into the attic insulation, so we reattached and mastic-sealed the collar, replaced two crushed flex runs, cleaned the matted evaporator coil, and sealed the air handler cabinet. Static pressure dropped from 0.9 to 0.5, and the upstairs bedroom finally held setpoint on a 102°F afternoon.
Trane Models & Products We Service in Round Rock
We work on the full range of residential Trane equipment found in Round Rock service area homes:
- XR series: XR13, XR14, XR16 air conditioners and heat pumps - the workhorses of the Dell-boom era, still common in Forest Creek and Teravista.
- XB series: XB13, XB14 builder-grade systems - budget units that came standard in many 2000s tract homes, often paired with undersized ductwork.
- XV variable-speed: XV18, XV20i systems - higher-end units where proper duct sizing and coil cleanliness are critical to achieving the efficiency ratings.
- Tempo / V-series air handlers and furnaces: Common in newer Round Rock builds and replacement jobs.
We stock genuine Trane OEM filters, coil panels, and door gaskets for the XR, XB, and XV lines. When OEM equivalents are unavailable or overpriced - flex duct, mastic, boot collars - we use quality aftermarket parts that meet or exceed original specifications. If a Trane coil or compressor is genuinely failing, we’ll tell you straight. In most Round Rock homes, though, a thorough duct cleaning, coil cleaning, and mastic seal on the plenum buys years of service before replacement makes sense.
Trane Service Pricing in Round Rock
Full Trane air duct system cleaning in Round Rock: $380-$620 per system, depending on home size, duct run count, and accessibility. This includes:
- Video inspection of every main trunk line
- Negative-pressure extraction cleaning of all supply and return ductwork
- Evaporator coil cleaning (accessible coil; pull-and-clean adds $120-$180)
- Condenser coil cleaning
- Flex duct repair and mastic sealing as needed
- Documented Photo Record: before-and-after images of every duct run, delivered as part of your job record
Flex duct repair or replacement: $85-$220 per run, depending on length and attic access. Coil pull-and-clean: $120-$180. We deliver a written price before any work starts - Haven Standard Clause 1 - and we don’t quote per-vent teaser rates that balloon once we’re on site. Free Second Opinion on any competitor’s written estimate: bring it, we’ll put our number next to it in writing.
Call (737) 259-5752 for an exact quote on your Trane system. Estimates are free, and the camera goes in first.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in Round Rock
Your cabinet panel gaskets have likely hardened from years of 140°F+ attic cycling, and the return side is pulling unfiltered attic air - plus the mountain cedar pollen that concentrates along the Balcones Escarpment - directly into your system. We see this in Forest Creek and Teravista constantly. We replace the OEM gaskets and mastic-seal the cabinet, which typically extends filter life from two weeks to two months during cedar season. Call (737) 259-5752 and we’ll show you the leak on camera before quoting.
Sometimes, if the coil is accessible through the cabinet door and the build-up is moderate. For heavy biofilm matting - common in Round Rock after cedar season - we recommend pull-and-clean for thorough results. We photograph the coil first so you can decide based on what we actually find, not a blanket recommendation. The written price covers whichever approach you choose.
In most cases, targeted repair of separated collars and crushed runs, combined with thorough cleaning and mastic sealing, restores performance for years at a fraction of full replacement cost. We only recommend full duct replacement when the flex is extensively degraded or the original installation is fundamentally undersized. We’ll show you the video evidence and give you both options in writing.
Yes - both neighborhoods are core to our Round Rock work. Our crews start early in summer months and use proper hydration and heat-safety protocols per Haven Standard Clause 3, which is part of why our Round Rock Dryer Vent Cleaning crews are trained to work efficiently in extreme attic heat. The attic heat is why we find so much thermal-degradation damage in these specific subdivisions; it’s also why we work efficiently and document everything photographically, so you’re not paying for time spent waiting for attic temperatures to drop.
No. Routine maintenance and duct cleaning do not void manufacturer warranties. What voids warranties is unlicensed work on refrigerant lines or electrical components. We’re clear about what we do and don’t touch. For Trane systems still under warranty, we document our work photographically in case you ever need to demonstrate proper maintenance was performed. Call (737) 259-5752 if you have questions about your specific warranty status.
Service Areas Near Round Rock
We run Trane service calls throughout the Round Rock metro, including Trane service in Brushy Creek directly west of the city, Trane service in Wells Branch to the south, plus Pflugerville, Hutto, and Jollyville. The same Dell-boom housing stock and cedar pollen exposure patterns extend through much of this corridor, so the diagnostic experience we bring to Round Rock applies directly to these neighboring communities.
Book Your Trane Service in Round Rock Today
Call (737) 259-5752 to schedule your Trane system inspection. You’ll speak to a live person, not a queue. We’ll run the camera, show you what we find, and put a written price in your hand before any work begins. Every job includes our Documented Photo Record and is backed by the 365-Day Done Right Promise.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Round Rock since 2013.