Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAir Duct Cleaning in Taylor, TX
HVAC cleaning in Taylor typically runs $280-$480 for a whole-system service, with new-construction homes near the Samsung campus often needing their first cleaning within 18 months of move-in. We’re CleanRun Duct Repair & Cleaning, and we dispatch crews to Taylor from our Austin office to handle the specific problems this growth market creates: drywall-contaminated ductwork in fresh subdivisions, clay-soil foundation shifts crimping older runs, and mountain cedar pollen loads that overwhelm systems from December through February. Call (737) 259-5752 for a written estimate before any work starts.
Why Taylor Homes Are Different
Taylor sits on the Blackland Prairie’s heavy expansive clay, and that soil doesn’t stay still. Older slab homes throughout the established neighborhoods see chronic foundation movement that disconnects duct runs and opens gaps where soil, moisture, and pests enter the system. The historic core near downtown holds early 20th-century craftsman bungalows with original galvanized ductwork or early flex-duct retrofits that have never been properly cleaned.
The bigger story is the south side. Samsung’s $17+ billion semiconductor fabrication plant triggered a construction boom that’s still accelerating, and crews working TX-79 and the new subdivisions south toward the campus are building under pressure. Drywall compound dust, blown-in insulation fragments, and general construction debris routinely contaminate ductwork in homes that are only 1-2 years old. Many buyers are out-of-state semiconductor transplants paying new-construction prices who assume the builder cleaned the ducts before certificate of occupancy. They did not.
Add Taylor’s Central Texas climate - HVAC systems running nearly continuously April through October - and the region’s brutal mountain cedar (Ashe juniper) pollen season peaking December through February. Systems already loaded with construction debris or aged accumulation get hit with biological loads they’re not designed to handle.
Our Main Taylor Services
Homeowners in Taylor call us most often for these three services, each with its own dedicated page:
Air Duct Cleaning in Taylor
Whole-system negative-pressure extraction for the duct runs, plenum, and registers in your home. In Taylor, we regularly find drywall dust caked at the first elbow in new subdivisions, and clay-soil grit in older homes where foundation movement has compromised seals. Every job ends with a Documented Photo Record of every run, before and after. Air Duct Cleaning in Taylor
Dryer Vent Cleaning in Taylor
Full exhaust-duct cleaning from appliance to termination, with airflow testing before and after. Rapid new construction in Taylor has left many homes with long, convoluted dryer vent runs through attics that trap lint. We document the restriction level and the post-cleaning airflow in writing. Dryer Vent Cleaning in Taylor
Duct Repair & Sealing in Taylor
Repair of disconnected or damaged duct runs, sealing of leaks with mastic and metal-backed tape, and replacement of crushed or deteriorated flex duct. Taylor’s expansive clay soils make this a recurring need in older slab homes where foundation movement has pulled connections apart. Duct Repair & Sealing in Taylor
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterHVAC Cleaning in Taylor
HVAC cleaning in Taylor addresses the accelerated accumulation that Central Texas heat and pollen create inside your system’s components. We clean evaporator coils clogged with mountain cedar debris, blowers coated in construction dust from new subdivisions, and condensers struggling with the region’s long cooling season. Our crews use Rotobrush and Nikro equipment, and every job starts with a written price under Haven Standard Clause 1. HVAC Cleaning covers our full approach.
Evaporator Coil Cleaning
Signs you need it
Ice buildup on the coil, weak airflow from registers, or your system running longer than usual to cool during Taylor’s May through September peak.
What it costs in Taylor
Evaporator coil cleaning typically runs $180-$320, depending on accessibility and contamination level.
How we do it
We access the coil through the air handler, apply foaming cleaner, rinse with low-pressure water, and photograph the before and after condition for your job record.
Blower Cleaning
Signs you need it
Unusual vibration, reduced airflow, or dust puffing from registers when the system cycles on.
What it costs in Taylor
Blower cleaning and balancing typically runs $150-$260.
How we do it
We remove the blower assembly, clean blades and housing with compressed air and solvent, check amp draw, and document the assembly’s condition before reinstallation.
What HVAC Cleaning Costs in Taylor
| Item | Typical range in Taylor |
|---|---|
| Evaporator coil cleaning | $180-$320 |
| Blower cleaning | $150-$260 |
| Condenser cleaning | $120-$200 |
How do I know my HVAC components need cleaning?
Longer run times, weak airflow, or visible dust at registers are reliable indicators in Taylor’s climate. We inspect and photograph the coil, blower, and condenser before quoting any work. Call (737) 259-5752 for a free estimate.
Can construction dust from new neighbors affect my system?
Yes, fine drywall dust migrates through shared attic spaces and outdoor air intakes in dense new subdivisions. We check for cross-contamination during every HVAC cleaning in Taylor’s south-side developments.
Air Quality & Sanitizing in Taylor
Air quality and sanitizing in Taylor targets the biological load that Central Texas climate and rapid construction create: mold in damp ductwork from foundation leaks, bacteria thriving in debris-filled systems, and persistent odors from construction materials off-gassing in new homes. We use Abatement Technologies and Honeywell equipment, and every treatment is quoted in writing before application. Air Quality & Sanitizing details our full protocol.
Mold Treatment
Signs you need it
Musty odor when the system runs, visible spotting around registers, or allergy symptoms that worsen at home during Taylor’s humid summer months.
What it costs in Taylor
Whole-system mold treatment typically runs $350-$600, including application and post-treatment verification.
How we do it
We apply EPA-registered antimicrobial through the duct system, treat the evaporator coil and drain pan, and provide lab-verified clearance documentation or photographic evidence of remediation.
UV Light Installation
Signs you need it
Recurring microbial growth after cleaning, or a household member with respiratory sensitivity to Taylor’s pollen and mold spore loads.
What it costs in Taylor
UV-C light installation typically runs $400-$650, including the lamp, housing, and electrical connection.
How we do it
We mount a UV-C lamp in the air handler near the coil, wire to the blower circuit, and show you the installation and operating documentation before activation.
What Air Quality & Sanitizing Costs in Taylor
| Item | Typical range in Taylor |
|---|---|
| Mold treatment (whole system) | $350-$600 |
| UV light installation | $400-$650 |
| Bacteria sanitizing | $250-$450 |
Is mold common in Taylor’s new construction?
Yes, we find it in homes where foundation settling created condensate leaks or where construction moisture was trapped in ductwork. We test and photograph before treating. Call (737) 259-5752 for a free inspection.
Will UV lights reduce my pollen allergies?
UV-C lamps target mold and bacteria on the coil and in the air handler; they do not filter pollen. For pollen, pair UV with a properly sized media filter changed on schedule through Taylor’s December-February cedar season.
Brands We Service in Taylor
We stock parts and service systems from Honeywell, Aprilaire, and other major manufacturers. Most common components are available same-day through our Austin supply chain, and our technicians carry standard filters and UV lamps on every Taylor truck. See our brands for the full list.
Pricing for Air Duct Cleaning in Taylor, TX
| Service | Typical range in Taylor |
|---|---|
| Whole-system air duct cleaning | $280-$480 |
| Dryer vent cleaning | $120-$200 |
| Duct repair & sealing (per run) | $150-$350 |
| Evaporator coil cleaning | $180-$320 |
| Blower cleaning | $150-$260 |
| Condenser cleaning | $120-$200 |
| Mold treatment (whole system) | $350-$600 |
| UV light installation | $400-$650 |
| Bacteria sanitizing | $250-$450 |
| Odor removal treatment | $200-$380 |
In Taylor, prices increase with system size, contamination level, and accessibility issues in older homes with limited crawl space. Every quote is written and agreed before work starts, with no per-vent add-ons or post-arrival revisions.
Neighborhoods We Serve in Taylor
Our crews cover the full Taylor city limit and surrounding Williamson County addresses, from the historic downtown core to the newest plats south of TX-79. Scheduling is typically available within 3-5 business days, with dispatch coordinated from our Austin office.
- Downtown Taylor / Historic District
- Southbrook (new construction, Samsung workforce)
- Taylor Crossing
- Mustang Ridge area
- Barrett Creek and east-side developments
Service Area - Cities Near Taylor
We serve Taylor homeowners directly and regularly travel to neighboring communities for scheduled work. Our crews also cover Hutto, TX, Pflugerville, TX, Round Rock, TX, and Georgetown, TX from the same dispatch base.
Serving Taylor, TX - Our Local Coverage Area
We’re based in the Taylor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Taylor
No permit is required for standard residential duct cleaning or HVAC maintenance in Taylor. Duct repair or modification that alters the building envelope may need Williamson County review; we flag this during inspection if it applies to your job.
We prioritize these calls and typically inspect within 3-5 business days. Many south-side buyers book during their walk-through period so we can clean before move-in, when the debris is concentrated and access is easiest.
Yes, we cover Williamson County addresses surrounding Taylor, including rural properties on well water where humidifier and duct conditions differ from city systems. Mileage fees apply beyond 15 miles from downtown Taylor; we disclose this in writing before booking.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Taylor Customers Say
"My allergies genuinely improved. They also told me the ducts did not need sealing, which I had been quoted for elsewhere."
- Petra K."On time, professional, and explained what the readings meant without talking down to me."
- Warren E."The dryer vent was almost completely blocked with lint. They showed me the photograph and I understood immediately why the dryer had been running twice."
- Lucia M.