Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Air Duct Cleaning in Round Rock: What to Know First
We provide independent Abatement Technologies air duct cleaning in Round Rock, with most residential systems completed in a single scheduled visit and written pricing delivered before any panel comes off. A typical whole-home Abatement Technologies system runs between $380 and $620 in this market, depending on duct count and what the camera shows at the first elbow. This page is for homeowners running Abatement Technologies HEPA filtration units, PREDATOR portable air scrubbers, or CAP series central systems who need ductwork that matches the equipment’s spec. Call (737) 259-5752 for a free estimate with a written price before work starts.
How Abatement Technologies Products Fail - and How We Fix Them
- CAP600-UVP plenum degradation. The ultraviolet photocatalytic module in this series sits upstream of the filter bank, and in Round Rock’s hard-water environment the quartz sleeve fouls with mineral scale faster than the manual suggests. We pull the plenum, descale with manufacturer-approved solution, and photograph the sleeve condition so the homeowner sees why replacement beat cleaning.
- PREDATOR 750 negative-pressure seal fatigue. These portable units move between job sites constantly, and the neoprene inlet gasket compresses permanently after roughly 18 months of commercial use. We stock the OEM gasket kit, but for residential owners we also source a silicone aftermarket alternative that outlasts the original in Texas heat. Haven Standard Clause 1: both options are priced in writing before installation.
- HEPA-AIRE PAS2400 filter-bypass at the rack rails. The aluminum filter rack on this passthrough unit flexes slightly when loaded with 99.97% HEPA media, creating a bypass gap at the top corner that defeats the pressure differential. We shim with stainless rail stock, then verify with a manometer reading above 1.0 inches water column before the unit goes back into service.
- Abatement Technologies HEPA-Care HC500 duct adapter misalignment. The flexible duct collar on this whole-house unit was designed for 8-inch rigid duct, but Round Rock’s 2015-2020 build era used 7-inch flex in many Teravista and Stone Oak Ranch homes. We fabricate a transition piece on-site rather than force the connection, because a crimped flex run costs you static pressure and filter life.
- CAP1000-UV control board moisture intrusion. The board housing sits in the return airstream, and in homes where the evaporator coil has ever overflowed, condensate wicks up the low-voltage harness. We treat this as a duct-system hygiene issue, not just an electronics swap: the camera goes in first. Then we talk. Then we dry, seal, and replace.
Our Abatement Technologies Air Duct Cleaning Process
- 1
Video inspection of every main trunk line. Tomas Reyes runs the camera personally on Abatement Technologies systems because the internal baffling differs from standard residential units. We deliver the footage before quoting.
- 2
Written scope and price under Haven Standard Clause 1. No exceptions. The price covers the full system, not per-vent arithmetic.
- 3
Negative-pressure extraction with Abatement Technologies-compatible equipment. We match our Rotobrush and Nikro tools to the duct material and liner condition your specific unit serves. No universal settings.
- 4
OEM or verified aftermarket parts decision. For Abatement Technologies UV modules, we stock OEM quartz sleeves. For gaskets and rail hardware, we offer the aftermarket option when it outperforms the original. Both are itemized.
- 5
Post-cleaning pressure test and photo record. Every duct run, before and after, with static pressure readings at the unit. The photo record is a standard deliverable, not an upsell.
- 6
365-Day Done Right Promise activation. Backed in writing. If the pressure differential drops or the filter bypass returns, we make it right.
BeforeAfterWhat Abatement Technologies Air Duct Cleaning Costs in Round Rock
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Residential whole-system cleaning (CAP series) | $380 - $620 | Duct count, plenum access, UV module condition |
| PREDATOR portable unit deep clean | $240 - $380 | Filter bank count, gasket replacement needed |
| HEPA-AIRE passthrough service | $320 - $480 | Rack rail shimming, filter media grade |
| Video inspection only | $0 - $85 | Free when bundled with cleaning; standalone fee credited to work |
These are Round Rock market ranges for homes built 2015-2025, where flex duct and hard-water scale are the norm. A written price locks your number before work starts. Call (737) 259-5752 for an exact quote.
Why Round Rock Homeowners Call CleanRun Air Duct Cleaning Round Rock for Abatement Technologies Work
We are an independent Abatement Technologies service provider, not a factory-authorized dealer, which means our loyalty is to the homeowner’s system performance, not a parts quota. Tomas Reyes and his crew have worked Abatement Technologies equipment in Round Rock long enough to know that cedar pollen season loads HEPA media differently than Austin’s oak pollen, and that Stone Oak Ranch’s construction-era drywall dust has a specific density that shows up on camera.
Our equipment roster includes Abatement Technologies, Rotobrush, Nikro, Honeywell, Aprilaire, and Guardsman. We also service Lennox, Trane, and Carrier systems, so when a Round Rock home has mixed-brand HVAC architecture, we do not subcontract the diagnosis. The 365-Day Done Right Promise applies to every job, and the photo record proves what was done. Background-checked, uniformed technicians under Haven Standard Clause 3: Verified Crews. License number published below.
FAQs
No, provided the work is performed by qualified technicians using manufacturer-compatible methods. We document our process and parts sources so any warranty claim you file later has supporting evidence. Call (737) 259-5752 if your dealer questions the service history.
We deliver a Documented Photo Record of every duct run, before and after, as a standard deliverable on every visit. You see the debris at the elbow, then you see the clean metal. If a company will not show you, they likely cannot. Call (737) 259-5752 and ask to see a sample record before booking.
Replacement makes sense when the cost of repair exceeds 60% of a comparable new unit and the existing system is past 12 years. For Abatement Technologies HEPA filtration units under 8 years, repair usually wins because the filter housing and fan assembly outlast the control components. We put both numbers in writing under Haven Standard Clause 1 so you decide with data.
Every 3 to 5 years for homes without pets or recent construction. In Round Rock’s pollen-heavy spring and after any renovation, every 2 to 3 years is realistic. The camera tells the truth: we have found 2-inch debris layers in three-year-old Teravista systems and nearly clean runs at year six. Call (737) 259-5752 for a free inspection.
For UV quartz sleeves and control boards, yes: the spectral output and voltage tolerances are spec-dependent. For gaskets, rail hardware, and duct adapters, quality aftermarket often outperforms OEM in Texas heat and hard-water conditions. We stock both, explain the trade-off, and price each in writing before you choose.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Round Rock at CleanRun Air Duct Cleaning Round Rock, serving Round Rock and nearby areas.