Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Leander
Air duct cleaning in Leander typically runs $350-$650 for a full residential system, and every job starts with a written price before we touch a single panel. We’re the crew that shows up to Crystal Falls, Travisso, and Bryson with Rotobrush and Nikro equipment, background-checked technicians, and a camera that documents what we find inside your ductwork before we say a word about what needs to happen next. Scheduling is coordinated from our Austin office, and our crews serve Leander daily. Call (737) 259-5752 for a free written estimate.
Why CleanRun Air Duct Cleaning Round Rock Is Leander’s Preferred Air Duct Cleaning Company
We’ve been serving Leander since the growth surge was still building out Larkspur and the northern reaches of Crystal Falls. Our Air Duct Cleaning team has documented photo records from more than 52,000 homes since 2013, and a significant share of those are right here in Leander’s master-planned communities.
Leander customers find us because they searched for someone who would name a price before arriving, show them what was actually inside their ducts, and stand behind the work in writing. The 365-Day Done Right Promise is backed on every job, not buried in a policy manual. Haven Standard Clause 1 requires a written price before any work starts. No exceptions.
Our technicians are uniformed, background-checked, and identified by name before they arrive at your Leander home. Haven Standard Clause 3: Verified Crews. You know who’s coming, what equipment they’re bringing, and what you’ll pay before the truck leaves the lot.
Tomas Reyes built CleanRun on the principle that a homeowner should see the evidence before making a decision. That approach resonates in Leander, where buyers paid premium prices for production-builder homes and expect service providers to document their claims.
Our Air Duct Cleaning Services in Leander
Residential Duct Cleaning in Leander
Leander’s housing stock is overwhelmingly 2005-2023 production-builder construction by Perry Homes, Meritage, and KB Home. These homes were built fast, and the ductwork was often the last system sealed before close. We routinely find drywall compound dust, blown insulation fragments, and construction tape remnants in homes that are only four to six years old. Our residential service includes full negative-pressure extraction through every duct run, the flexible duct channel that carries conditioned air from your main trunk to each room, with HEPA filtration on the exhaust so nothing resettles in your Leander home.
Commercial Duct Cleaning in Leander
Leander’s commercial growth along Hero Way and the 183A corridor has brought retail, medical, and light industrial spaces online quickly. These buildings face the same compressed-construction timeline as residential, with rooftop units and commercial trunk lines that accumulate construction debris and cedar pollen through intake vents. We clean commercial systems with the same documented photo record and written pricing structure, scaled to the larger equipment and occupancy requirements of Leander’s expanding business base.
Supply Duct Cleaning in Leander
Supply ducts push conditioned air into your living spaces, and in Leander’s production-builder homes they’re often flex-duct runs that sag at elbows and trap debris. The December-February Ashe juniper pollen season loads these ducts with microscopic particles fine enough to bypass standard filters. We agitate and extract from every supply register back to the plenum, the main distribution box where your trunk line splits to individual runs, so the air reaching your bedrooms and living rooms in Leander is moving through clean channels.
Return Duct Cleaning in Leander
Return ducts pull air back to your air handler for reconditioning, and they’re the primary intake path for Leander’s caliche dust, cedar pollen, and construction particulate. In a typical Leander home, the return path is where we find the heaviest loading, especially if the filter cabinet was poorly sealed during original construction. We clean the full return path, including the filter rack and air handler cabinet, with source removal equipment that captures debris rather than redistributing it.
Full System Cleaning
This is our most called-for service in Leander, and for good reason. A full system cleaning addresses supply ducts, return ducts, the plenum, and the air handler cabinet as one integrated system. In Leander’s fast-built homes, partial cleaning leaves construction debris in the untouched sections to recirculate through the blower motor and back into the cleaned runs. We don’t do partial jobs. The written scope covers every component, and the photo record shows each one before and after.
Video Inspection
Every full system cleaning in Leander includes video inspection of the duct interior. We run camera equipment down the supply and return lines so you see the debris build-up, the construction remnants, the pollen loading, before we quote the work. The video becomes part of your documented job record, delivered with the before-and-after photo set. In Leander’s newer subdivisions, this is often the moment homeowners understand why their “new” house smells musty or triggers allergies despite its age.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Leander
Our equipment roster includes Nikro negative-pressure machines, Honeywell media filters, and Aprilaire whole-home air cleaners, brands you can look up independently before we arrive. We don’t use equipment we can’t name. In Leander, where homeowners research every purchase, that transparency matters. If your system has an Aprilaire media cabinet or a Honeywell electronic air cleaner, we service it with manufacturer-appropriate methods and document the condition in your photo record. Parts for these brands are stocked for Leander jobs, so we’re not waiting on supply house runs while your system is open.
Common Air Duct Cleaning Problems We See in Leander Homes
- Construction debris sealed in from day one. In Leander’s 2005-2023 production-builder homes, duct boots were often the last components closed before final walkthrough. Drywall mud, insulation fragments, and blue painter’s tape ended up inside the ductwork and stayed there. A homeowner in Bryson called us five years after move-in because of a persistent dusty smell; our camera showed hardened drywall compound packed at the first elbow of the master bedroom supply run.
- Cedar pollen loading beyond filter capacity. Leander sits at the western edge of the Blackland Prairie where it meets the Ashe juniper belt. The December-February pollen season produces some of the densest cedar counts in the continental US. These particles are small enough to pass through standard fiberglass filters and coat duct interiors far more aggressively than in flatter eastern suburbs like Round Rock or Pflugerville.
- Flex-duct sag and compression at elbows. Builder-grade flex-duct in Leander’s master-planned communities was often installed with minimal support straps, creating low points where debris accumulates and airflow restriction develops. We find these sags with camera inspection and address them during cleaning, documenting the condition for your record.
- Surface-only cleaning from low-bid providers. A shop-vac at the register doesn’t reach the trunk line, and it certainly doesn’t reach construction debris at the duct boot. In Leander’s high-volume production homes, this “cleaning” leaves the real problem untouched while the homeowner pays for vacuum noise. Our negative-pressure extraction with agitation tools sources debris from the full duct run, not just the first few feet.
Pricing for Air Duct Cleaning in Leander, TX
A typical residential full system cleaning in Leander runs $350-$650, depending on system size, accessibility, and the condition we find during initial inspection. A basic supply-and-return cleaning on a smaller single-story home in Larkspur or Crystal Falls typically falls at the lower end of that range. Larger two-story homes in Travisso with multiple zones and extensive flex-duct runs trend toward the higher end. Commercial systems are scoped individually and quoted in writing before work begins.
What moves the price: number of duct runs, presence of hard-to-access plenum locations, and the degree of debris loading we document during video inspection. We do not price per vent. Haven Standard Clause 1 requires one flat price per system, agreed in writing, before any work starts. The estimate is free. The written quote is binding. Call (737) 259-5752.
We Also Serve Cities Near Leander
Our crews work daily across the northern Austin metro, including Air Duct Cleaning in Leander and surrounding cities: Cedar Park to the southeast, Georgetown to the northeast, Round Rock to the east, and Pflugerville to the southeast. Each city gets the same written-price-first protocol, the same documented photo record, and the same 365-Day Done Right Promise.
Serving Leander, TX - Our Local Coverage Area
We’re based in the Leander area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Leander
Yes, and possibly more urgently than an older home in a slower-built market. Leander’s production-builder homes from 2005-2023 were closed on compressed schedules, and duct systems often hold drywall compound dust, insulation fragments, and construction tape from the original build. In a Bryson subdivision home that was only five years old, our tech pulled whole strips of blue painter’s tape and chunks of hardened drywall mud out of the duct boots before we even hooked up the negative pressure machine. We ran camera inspection down the supply and return ducts, used agitation tools to break the packed drywall dust loose, and finished with HEPA filtration on the air handler. The homeowner said the musty, dusty smell that had hung around since move-in was gone by the time we packed up. Call (737) 259-5752 for a free written estimate.
Two factors specific to Leander drive heavier duct loading. First, the 2005-2023 production-builder surge here produced enormous volumes of fast-installed ductwork with construction debris sealed inside from day one. Second, Leander sits at the western edge of the Blackland Prairie where it meets the Ashe juniper belt, exposing homes to some of the heaviest cedar pollen loads in the nation each December-February. This pollen is fine enough to bypass standard filters and coat duct interiors far more aggressively than in flatter eastern suburbs. Your friends in Round Rock or Pflugerville face neither the compressed-construction debris window nor the same pollen density. Call (737) 259-5752 and we’ll show you what your camera inspection reveals.
Builders should have sealed all duct openings with proper caps, not tape, during drywall and insulation phases, then performed a thorough rough-clean before final HVAC startup and balance. In Leander’s fast-close environment, many skipped the final duct clean or used the HVAC system itself to “clear” construction dust, which simply relocated it to the duct walls and air handler. A professional duct cleaning with negative-pressure extraction and HEPA filtration should have been part of the pre-occupancy punch list. It rarely was. We can’t change what happened at build, but we can document what’s there now and remove it properly. Call (737) 259-5752 for a free inspection.
We start with video inspection to locate construction debris, pollen loading, and any flex-duct sag or damage. Then we seal the system for negative-pressure extraction, using a Nikro-powered HEPA vacuum at the air handler to create suction throughout the duct network. Agitation tools, including Rotobrush mechanical brushes and compressed-air whips, break debris loose from duct walls without damaging flex-duct liners. We clean every supply and return run, the plenum, and the air handler cabinet, capturing all debris at the source. The job concludes with a second video pass and a complete before-and-after photo record delivered to you. Call (737) 259-5752 for a written quote.
Yes, significantly. Standard fiberglass filters, typically MERV 1-4, capture almost none of the Ashe juniper pollen that loads Leander ducts from December through February. A MERV 11-13 pleated filter captures a meaningful percentage of these fine particles before they reach your ductwork, though no filter eliminates the need for periodic professional cleaning in this pollen environment. We assess your filter cabinet size and airflow capacity during every job and document our recommendation in your written job record. The wrong high-MERV filter can actually restrict airflow and strain your blower motor, so we match the filter to your system’s specifications. Call (737) 259-5752 and we’ll evaluate your setup during the free estimate.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Leander since 2013.