Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Air Quality & Sanitizing in Round Rock: What to Know First
CleanRun Air Duct Cleaning Round Rock provides independent Abatement Technologies air quality and sanitizing services in Round Rock, with most jobs scheduled within 3-5 business days and completed in a single visit. We quote a flat, written price before any work begins, and every job includes a documented photo record of every duct run. This page is for homeowners who own Abatement Technologies air purification or sanitizing equipment and need service that preserves warranty coverage while addressing the mold, bacteria, or allergen problems the system was installed to solve. Call (737) 259-5752 for a free estimate.
How Abatement Technologies Products Fail - and How We Fix Them
- PREDATOR 750 HEPA units with saturated carbon beds - The activated carbon filtration stage in these portable remediation units saturates faster in Round Rock than manufacturer estimates suggest, largely because cedar pollen season (typically February through April) loads the pre-filter and forces the carbon to handle more volatile organic compounds than designed. We replace the carbon bed with OEM-spec media and photograph the saturation gradient so you can see why the odor complaints returned.
- BD2K series negative air machines with blower motor imbalance - The BD2K’s direct-drive blower develops vibration patterns after roughly 2,000 runtime hours that loosen HEPA seal gaskets; the unit still moves air, but filtration efficiency drops below the 99.97% threshold. We torque the housing to factory spec, replace the gasket set, and run a DOP (dispersed oil particulate) test to verify the seal before the unit goes back into service.
- CAP600-UVP systems with failed UV-C lamp ballasts - The ultraviolet germicidal irradiation lamp in these ceiling-mounted air purifiers typically fails silently; the blue glow remains visible, but output at 254 nm drops below effective germicidal intensity. We meter actual UV output with a calibrated radiometer, not visual inspection, and replace only the lamp-ballast assembly when the reading falls below 40 µW/cm² at one meter.
- Guardian HEPA systems with compromised negative-pressure integrity - The flexible ducting on Guardian portable units fatigues at the collar joints after repeated relocation, creating leaks that defeat the containment purpose. We pressure-test the full assembly, replace fatigued sections with antimicrobial-lined flex duct, and document the post-repair static pressure reading.
- Abatement Technologies HEPA500 units with clogged final filters in high-dust Round Rock conditions - New construction in neighborhoods like Teravista and Stone Oak Ranch generates respirable silica dust that loads HEPA500 final filters prematurely, causing the variable-speed motor to ramp to maximum and accelerate bearing wear. We log the pressure differential across the filter bank, replace with OEM HEPA if the ΔP exceeds manufacturer limits, and advise on pre-filter change intervals based on your specific jobsite conditions.
Our Abatement Technologies Air Quality & Sanitizing Process
- 1
Camera inspection before quote. We run a borescope through the plenum and main trunk lines to document what’s actually present: mold growth, bacterial biofilm, construction debris, or degraded filter media. The camera goes in first. Then we talk.
- 2
Written flat price delivered. Based on the footage, we provide a single-system price in writing before any panel comes off. Haven Standard Clause 1: no exceptions.
- 3
OEM or verified-equivalent parts selection. For Abatement Technologies equipment, we source OEM filters, UV lamps, and gaskets when available; when lead times extend beyond what the job allows, we use aftermarket components that meet or exceed the original specification and document the substitution in writing.
- 4
Service execution with photographic documentation. Every duct run is photographed before and after treatment. For sanitizing jobs, we note the EPA-registered antimicrobial applied, dwell time observed, and post-treatment ATP (adenosine triphosphate) bioluminescence reading where applicable.
- 5
Operational verification. We run the Abatement Technologies unit through a full cycle, measure airflow at specified test points, and record the performance data in the job record.
- 6
365-Day Done Right Promise activation. The written guarantee is included with your photo record and invoice. If the problem returns, we make it right.
BeforeAfterWhat Abatement Technologies Air Quality & Sanitizing Costs in Round Rock
| Service | Typical Range | What Moves the Price |
|---|---|---|
| UV-C lamp replacement, CAP600-UVP | $340-$480 | Ballast condition, access difficulty in attic plenum |
| HEPA filter bank replacement, HEPA500 | $280-$420 | Pre-filter condition, whether frame cleaning is needed |
| Carbon bed replacement, PREDATOR 750 | $390-$550 | Bed volume, contamination type (VOC vs. particulate loading) |
| Full system sanitizing with antimicrobial treatment | $520-$780 | System count, ductwork linear footage, severity of biological growth |
| Negative-pressure integrity restoration, Guardian series | $450-$680 | Extent of flex duct replacement, collar count |
These are whole-system prices, not per-vent or teaser figures that balloon once the truck arrives. Every estimate is free, and we provide a Free Second Opinion on any competitor’s written quote. Call (737) 259-5752 to schedule.
Why Round Rock Homeowners Call CleanRun Air Duct Cleaning Round Rock for Abatement Technologies Work
We’ve worked on Abatement Technologies equipment in Round Rock homes since 2013, and we’ve learned that these units reward precise maintenance and punish guesswork. Our technicians are background-checked, uniformed, and identified by name before arrival - Haven Standard Clause 3: Verified Crews. The 365-Day Done Right Promise is backed in writing on every job, not just stated in marketing copy. When Abatement Technologies parts are backordered, we also service Lennox, Trane, and Carrier air quality systems, so we’re not stuck waiting while your indoor air quality deteriorates. Tomas Reyes and our crew have handled jobs from older Pflugerville subdivisions to new builds in Teravista where the return plenum still carried drywall dust from final trim-out.
FAQs
No, provided the service uses EPA-registered antimicrobials applied according to label directions and does not modify electrical or mechanical components beyond factory specifications. We document every product used and method followed, and as an independent Abatement Technologies service provider, we carry liability coverage for any workmanship-related issue. Call (737) 259-5752 if you need warranty documentation for your records.
You receive a documented photo record of every duct run before and after treatment, plus the written scope of antimicrobial application. For biological contamination jobs, we include ATP bioluminescence readings where the surface type permits valid sampling. The camera shows what was there; the post-treatment photo shows what remains. If you have questions after reviewing your job record, call (737) 259-5752.
Replacement makes sense when repair costs exceed 60% of comparable new equipment price, or when the unit lacks capacity for your current square footage. We give you both numbers in writing - repair flat price and replacement ballpark - so you can decide on documented evidence rather than a technician’s preference. For a free assessment, call (737) 259-5752.
Most UV lamp replacements in accessible plenum locations are completed in 90-120 minutes, including the radiometer verification step that confirms germicidal output. Attic-mounted CAP600-UVP units in Round Rock’s older neighborhoods may require additional access time if the air handler sits in a tight chase. We quote the full duration in writing before starting.
The $79-$149 coupon model typically covers a vacuum pass and a spritz of unlabeled product, with no photo documentation and no verification step. We photograph every run, meter UV output where applicable, and back the work with a 365-Day Done Right Promise. The price difference is the difference between a documented service record and a van visit. For an exact written quote on your Abatement Technologies system, call (737) 259-5752.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Round Rock at CleanRun Air Duct Cleaning Round Rock, serving Round Rock and nearby areas.