Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Leander
Dryer vent cleaning in Leander typically runs $149-$289 for a standard single-family vent run, with most jobs completed in 60-90 minutes and a written price delivered before any work starts. We’re the Dryer Vent Cleaning team at CleanRun, and we’ve been pulling lint, cedar pollen, and caliche dust from Leander vent systems since 2013. Our scheduling is coordinated from our Austin office, but our crews live and work in the Leander area, so we’re familiar with the specific vent configurations in Crystal Falls, Travisso, Bryson, and the acreage properties along Ronald Reagan Boulevard and Bagdad Road. Call (737) 259-5752 for a free written estimate.
Why CleanRun Air Duct Cleaning Round Rock Is Leander’s Preferred Dryer Vent Cleaning Company
We’ve served more than 52,000 homes since 2013, and a growing share of them are in Leander’s fast-expanding corridor. Our technicians know what to expect when they pull up to a 2019 Perry Homes build in Larkspur versus a 2007 KB Home in Cedar Park Highlands. That matters because the vent problems are different.
Our reviews from Leander customers consistently mention two things: the photo record showing what was actually inside the vent, and the written price that didn’t change once the truck arrived. Haven Standard Clause 1 is non-negotiable - we put the number in writing before touching a tool.
Response time to Leander is typically next-day or within 48 hours, depending on routing from our Austin dispatch center. We don’t manufacture urgency. We schedule, show up on time, and document what we find.
Local knowledge that builds trust: our crews carry vent caps and bird guards sized for the builder-grade terminations common in Leander’s production-built homes. We don’t have to order parts. We stock them because we’ve seen the same flimsy caps missing from Bryson and Travisso properties dozens of times.
Our Dryer Vent Cleaning Services in Leander
Dryer Vent Inspection
Every Leander job starts with a camera inspection of the full lint pathway, from the dryer connection to the exterior termination. In newer Leander neighborhoods like Bryson and Larkspur, we’re often documenting collapsed flex sags, missing bird guards, and construction debris sealed inside during the original build. The inspection report includes dated photos of every section, delivered as part of the standard job record.
Vent Cleaning
We clean the full vent run using agitation tools under negative-pressure extraction with HEPA filtration - not a shop vacuum pushed into the wall. This matters in Leander because the combination of cedar pollen, caliche dust from unpaved roads, and standard lint fuses into a dense mat that vacuum suction alone won’t dislodge. Our equipment roster includes Rotobrush and Nikro systems designed specifically for residential dryer vent work.
Lint Removal
Lint removal in Leander is rarely a simple trap cleaning. On properties near Crystal Falls or the acreage lots along San Gabriel Parkway, we regularly find lint packed into low sags and sharp elbows where the production-builder flex run was installed with minimal support. The lint pathway stalls airflow precisely where the vent changes direction. We remove the full blockage, not just what’s accessible from the laundry room.
Vent Rerouting
Some Leander homes, particularly the rapid-build inventory from 2010-2018, were constructed with vent runs that exceed 25 feet or include multiple elbows against manufacturer guidelines. In these cases, we reroute the vent to a shorter, straighter path with solid metal duct where possible. Every reroute includes a written scope and a new photo record of the corrected installation.
Bird Guard Installation
Leander’s rural edge means birds, wasps, and wind-driven debris enter unprotected vent terminations year-round. We install Guardsman bird guards sized to the specific vent cap, with stainless-steel mesh that blocks pests without restricting airflow. This is standard on most Leander jobs because the original builder caps are often missing or deteriorated within the first five years.
Vent Cap Replacement
When the exterior termination is cracked, missing louvers, or improperly sealed, we replace it with a code-compliant cap appropriate for Leander’s wind exposure and pollen loading. We stock common sizes so there’s no delay waiting for parts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Leander
Our crews arrive with professional-grade equipment from Rotobrush, Nikro, and Guardsman - brands you can look up independently before we start. We stock vent caps, bird guards, and transition fittings sized for the builder-grade systems installed across Leander’s master-planned communities. That means no return trips for parts and no extra charges for hardware that should have been on the truck.
Common Dryer Vent Cleaning Problems We See in Leander Homes
- Collapsed flex sags in newer construction. The 2005-2023 production-builder boom in Leander produced thousands of homes with unsupported flex duct that sags between joists. Lint collects in these low points and hardens into a felt-like mat that chokes airflow. We find this in homes as new as four years old in Bryson and Larkspur.
- Caliche dust fusion in rural and acreage properties. Homes on unpaved roads near Bagdad Road or the Crystal Falls rural lots pull fine caliche grit into the dryer vent, where it fuses with lint and cedar pollen into a dense, concrete-like blockage. Standard vacuum extraction won’t touch it. Agitation under negative pressure is required.
- Missing or flimsy vent caps on production-built homes. Builder-grade terminations in Leander’s rapid-growth inventory often lack proper bird guards or have plastic caps that crack within the first few years. We replace these with metal caps and proper pest screening as part of the standard cleaning scope.
- Construction debris sealed inside during original build. First cleanings in Leander’s newer homes routinely turn up blue painter’s tape scraps, drywall mud chunks, and blown insulation fragments that were left in the ductwork during the rapid-close construction timeline. These restrict airflow from day one and accelerate lint accumulation.
Pricing for Dryer Vent Cleaning in Leander, TX
A standard dryer vent cleaning in Leander runs $149-$189 for a single-story home with a straight vent run under 15 feet. Two-story homes, longer runs, or vents with multiple elbows typically fall in the $189-$249 range. Vent rerouting, bird guard installation, or cap replacement adds $40-$89 per item, quoted in writing before work begins.
Rural and acreage properties with detached laundry rooms or outbuilding dryers may require additional labor for access and longer hose runs; these jobs typically range $199-$289. We don’t quote per-vent or per-foot pricing. One flat price per system, agreed in writing, under Haven Standard Clause 1.
Every estimate is free. Bring a competitor’s written quote and we’ll provide a free second opinion, also in writing.
| Service | Typical Range in Leander |
|---|---|
| Standard single-story vent cleaning | $149-$189 |
| Two-story or multi-elvent vent cleaning | $189-$249 |
| Bird guard installation | $49-$89 |
| Vent cap replacement | $40-$75 |
| Rural/acreage or outbuilding dryer | $199-$289 |
We Also Serve Cities Near Leander
Our crews work Leander regularly and also serve Cedar Park, Georgetown, Round Rock, and Pflugerville. Each city’s housing stock and vent configurations differ, so we adjust our approach accordingly. Cedar Park’s older inventory has different failure modes than Leander’s production-built surge. Georgetown’s limestone geology produces its own dust profile. We know the difference because we document what we find in every home.
Serving Leander, TX - Our Local Coverage Area
We’re based in the Leander area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Leander
Twelve months is the realistic interval for rural Leander properties, not the standard two-year recommendation. Caliche dust from unpaved roads, cedar pollen from the Ashe juniper belt, and standard lint combine into a dense mat that fuses to duct walls faster than lint alone. Call (737) 259-5752 and we’ll put a specific interval in writing based on your property’s vent length and road surface.
The dryer is almost certainly airflow-starved by a blocked lint pathway, not worn out. In Leander’s 2005-2023 production-built homes, short flex runs with sharp elbows and minimal support sag and pack with lint within the first two to four years. The trap catches surface lint; the blockage is deeper in the vent. We document the full pathway with camera inspection and clear it under negative pressure with HEPA filtration.
Yes. Leander sits at the western edge of the Blackland Prairie where it meets the mountain cedar belt, and December-February pollen loads here are among the densest recorded in the continental US. That pollen is fine enough to bypass standard dryer lint traps and coat the interior of the vent, providing a sticky substrate that binds lint more aggressively than in flatter eastern suburbs. If you notice longer dry times in January or February, cedar pollen accumulation is likely a factor.
Yes. We service detached laundry rooms, barn workshops, and pool house dryers on Leander acreage properties. Longer vent runs and exterior exposure mean these systems typically need annual cleaning and often benefit from bird guard installation and cap replacement. We quote the full scope in writing before dispatch, including any access considerations specific to your property layout.
We start with a camera inspection of the full lint pathway, then use agitation tools under negative-pressure extraction with HEPA filtration to dislodge and remove the full blockage - not just trap-level lint. Every job concludes with airflow verification, a new photo record showing the cleared vent, and a written invoice matching the pre-work quote. The documented photo record is delivered as a standard deliverable, not an extra.
We were out at a property near Crystal Falls where the dryer had been taking two cycles to finish a load and the exterior flapper was barely moving. Our tech ran camera inspection down the lint pathway, found a collapsed sag holding a felt-like mat of lint mixed with cedar pollen and caliche dust, and used agitation tools under negative pressure with HEPA filtration to pull it out - the homeowner said the dryer finished in one cycle for the first time in a year.
Schedule Your Dryer Vent Cleaning in Leander
Call (737) 259-5752 to speak with a live person and schedule your free written estimate. We’ll ask about your home’s location in Leander, the dryer’s symptoms, and whether you’re on a standard lot or acreage property. The price we quote is the price you pay. Every job is backed by our 365-Day Done Right Promise and documented with before-and-after photos of your actual vent system.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Leander since 2013.
Dryer Vent Cleaning in Nearby Areas