Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Hornsby Bend
Dryer vent cleaning in Hornsby Bend typically costs $140-$280 for a standard single-run system, with most jobs completed in 60-90 minutes and a written price delivered before any work starts. For comprehensive Air Duct Cleaning in Hornsby Bend, we follow the same upfront pricing approach. Because Hornsby Bend sits in the Colorado River floodplain and runs measurably wetter than the higher ground west toward Austin, dryer vents here pull damp, lint-laden exhaust through cooler exterior runs - so lint clings and compacts inside the wall instead of blowing clear, and manufacturer-style cleaning intervals fall short. Floodplain humidity also means a vent that got river water during a flood can read ‘wet lint’ weeks later, not just blocked.
We dispatch crews to Hornsby Bend from our Austin office, and we know the area’s rural road network well enough to give accurate arrival windows. If your vent is taking longer to dry, the outside hood barely moves air, or you smell organic matter near the laundry area, call (737) 259-5752. We’ll answer live, schedule a visit, and put a written price in your hand before a panel comes off.
Why CleanRun Air Duct Cleaning Round Rock Is Hornsby Bend’s Preferred Dryer Vent Cleaning Company
We’ve been serving Travis County homeowners since 2013, and Hornsby Bend has become one of our most frequent call zones - not because the population is large, but because the conditions here genuinely demand more attention than standard maintenance schedules allow. Our Dryer Vent Cleaning in Hornsby Bend work is built around documentation: every vent run is photographed before and after, airflow is measured at the exterior hood, and the customer receives a complete job record.
Reviews from Hornsby Bend customers consistently mention two things - the technician showed them the photo record before discussing anything, and the price on the invoice matched the written quote exactly. Haven Standard Clause 1 requires it. Our crews are background-checked, uniformed, and identified by name before arrival. Haven Standard Clause 3: Verified Crews.
Response time to Hornsby Bend is typically same-week, sometimes next-day depending on route density. We don’t manufacture urgency. We do answer the phone live, 24/7, and we don’t ask you to “call for a quote” - we schedule the visit, inspect the system, and deliver a written price on site.
Our Dryer Vent Cleaning Services in Hornsby Bend
Dryer Vent Inspection
Every job starts here. We run a camera through the full lint pathway - from the dryer transition to the exterior hood - and measure airflow at the termination point. In Hornsby Bend, we pay particular attention to flood-affected runs: wet lint mats harden into dense plugs that standard visual checks miss, and rusted flex or foil sections from past water intrusion need identification before any cleaning is attempted. The inspection produces a documented photo record and a written scope with a fixed price. No exceptions.
Vent Cleaning
Our Dryer Vent Cleaning team uses Rotobrush agitation tools and Nikro negative-pressure extraction with HEPA filtration to remove lint buildup without pushing debris into wall cavities. In Hornsby Bend’s humid bottomland environment, lint compacts more densely than in drier western Travis County - the moisture binds fibers into a mat that requires mechanical agitation, not just air pressure. We clean the full run: transition duct, wall cavity, elbow joints, and exterior hood. Airflow is remeasured at the hood before we leave.
Lint Removal
Heavy lint accumulation is common in Hornsby Bend homes with longer vent runs or multiple elbows. The bioorganic dust from the nearby biosolids facility mixes with lint to form a dark, fine-grained residue that coats interior duct surfaces and restricts airflow far below manufacturer specifications. We remove this material completely, document the volume removed with photos, and note any structural damage the buildup may have caused.
Vent Rerouting
Many Hornsby Bend homes - particularly 1970s-1990s manufactured homes on private lots - were built with undersized, kinked, or excessively long flex duct that creates lint traps at every turn. Rerouting replaces these problematic pathways with properly sized, smooth-wall metal duct on the shortest practical path to the exterior. This is often the right solution when cleaning alone cannot restore adequate airflow, or when the existing run has been damaged by flood water, rust, or repeated overheating. We deliver a written price for the reroute before any demolition begins.
Bird Guard Installation
Post-storm wind-blown bottomland dust and biosolids-plant aerosols pack exterior hoods and bird guards faster here than in higher, drier areas. A proper bird guard prevents nesting while maintaining airflow - poorly designed ones become lint traps themselves. We install Guardsman-rated vent caps with integrated guards sized to your run’s CFM requirements, and we document the before-and-after airflow differential.
Vent Cap Replacement
Corroded, stuck, or improperly flapped vent caps are common on aging Hornsby Bend homes. A cap that won’t open fully or that flaps open randomly wastes energy and creates back-pressure that accelerates lint accumulation. We stock replacement caps compatible with Rotobrush and Nikro systems, install them with sealed connections, and verify proper operation before departure.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hornsby Bend
Our equipment roster includes Rotobrush agitation systems, Nikro negative-pressure extractors, and Honeywell and Aprilaire airflow measurement tools - brands customers can look up independently before agreeing to any work. We stock Guardsman vent caps and bird guards for common Hornsby Bend configurations, including the shorter exterior runs typical of manufactured homes and the longer wall cavities found in rural estate construction. Parts availability means most jobs complete in a single visit without ordering delays.
Common Dryer Vent Cleaning Problems We See in Hornsby Bend Homes
- Flood-damaged flex duct masquerading as “just dirty.” Homeowners who flooded in a past Colorado River bottom event assume a dried-out vent is fine, but the wet lint mat and any rusted flex or foil section actually needs replacement, not just a wipe-down - and that call gets missed without documentation.
- Post-storm exterior hood blockage. Wind-blown bottomland dust and biosolids-plant aerosols pack the exterior hood and bird guard, so a run that passed a before-storm inspection can read fully blocked after - cleaning on the old schedule is too late.
- Kinked transitions in manufactured homes. On 1970s-1990s manufactured homes here, undersized, kinked, unsealed flex duct kinks the lint pathway at the transition, so standard rod-and-brush cleaning stops short of the real buildup and the blower motor keeps seeing restricted airflow.
- Bioorganic residue coating interior surfaces. Technicians working Hornsby Bend regularly find a dark, fine-grained organic residue coating return-air grilles and duct interiors - a combination of biosolids-plant aerosols and Colorado River bottomland dust - that smells faintly of organic matter and clogs filters far ahead of schedule; homeowners who have lived there for years often normalize the odor until a cleaning reveals the source.
Pricing for Dryer Vent Cleaning in Hornsby Bend, TX
| Service | Typical Range in Hornsby Bend |
|---|---|
| Standard single-run vent cleaning | $140 - $220 |
| Heavy lint removal / extended run | $180 - $280 |
| Vent rerouting (new metal duct) | $340 - $580 |
| Bird guard installation | $85 - $140 |
| Vent cap replacement | $95 - $160 |
| Camera inspection with written report | $75 - $120 (waived with cleaning) |
What moves a job toward the higher end: longer runs with multiple elbows, flood-damaged sections requiring replacement rather than cleaning, access limitations in older construction, and the need for rooftop termination work. What keeps it at the lower end: straight single-story runs with standard exterior wall termination and no structural damage. Every price is written and agreed before work starts - Haven Standard Clause 1. Free estimates. Call (737) 259-5752 to schedule.
We Also Serve Cities Near Hornsby Bend
Our crews cover the full northeast Travis County corridor, including Hornsby Bend itself plus Round Rock, Brushy Creek, Wells Branch, and Pflugerville. Scheduling is coordinated from our Austin office with route optimization to minimize wait times across the service area.
Serving Hornsby Bend, TX - Our Local Coverage Area
We’re based in the Hornsby Bend area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Hornsby Bend
It depends on what the camera shows. Wet lint mats harden into dense plugs that cleaning alone won’t restore, and any rusted flex or foil section from water contact needs replacement for safety. We inspect first, photograph everything, and deliver a written scope that separates cleanable sections from replaceable ones - documentation your insurer can use. Call (737) 259-5752 for a free inspection.
Hornsby Bend’s floodplain humidity and proximity to the biosolids management plant create a unique particulate load - bioorganic aerosols and fine bottomland dust bind with lint and compact in cooler exterior runs. The higher moisture content means lint doesn’t blow clear; it sticks and accumulates. West of Austin, drier air and less organic particulate allow vents to perform closer to manufacturer intervals.
We deliver a Documented Photo Record on every visit - before, during, and after - plus a written scope with line-item pricing and technician notes on material condition. For flood-affected runs, we specifically photograph corrosion, wet lint mat density, and airflow measurements pre- and post-work. This is standard on every CleanRun job, not an extra charge. Haven Standard Clause 1 and Clause 5: Documented Accountability.
Usually a reroute. Kinked, undersized flex duct in 1970s-1990s manufactured homes creates a permanent lint trap that cleaning cannot fully resolve - the restriction returns within months. We camera the run, show you the kink and the airflow restriction, and quote a reroute with proper smooth-wall metal duct on the shortest path. The written price covers both options so you can compare.
Not necessarily - though the Colorado River floodplain humidity does accelerate mold colonization in duct lining. The dark, fine-grained residue common in Hornsby Bend is typically a combination of biosolids-plant aerosols and bottomland dust bound with lint, not active mold growth. We test and photograph; if mold is present, we note it in the written scope with remediation options. If it’s residue alone, cleaning removes it and we document the source so you know what you’re seeing. Call (737) 259-5752 and we’ll inspect at no charge.
Ready for a written price and a documented record of your vent’s actual condition? Call (737) 259-5752. We’ll answer live, schedule a visit to your Hornsby Bend home, and put a fixed price in writing before any work begins. Every job is backed by our 365-Day Done Right Promise - if it’s not right, we make it right, in writing, no manager approval required.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Hornsby Bend and northeast Travis County since 2013.