Dryer Vent Cleaning in Austin - Flat Price, Airflow Proven on the Day

Fast, Reliable Dryer Vent Cleaning Across Austin

Dryer vent cleaning in Austin typically costs $180-$340 for a standard single-run system, with rerouting or cap replacement adding $150-$400 depending on attic access and materials. Most jobs take 90 minutes to two hours, and every one starts with a written price before we touch a tool.

Call (737) 259-5752

We run Dryer Vent Cleaning crews daily from our Austin office, dispatching to Circle C Ranch, Steiner Ranch, Hyde Park, and the full metro. Austin’s nine-to-ten-month cooling season means your dryer runs harder and longer than nearly anywhere else in the country, and the attic ductwork in this city’s 1990s-2000s subdivisions has been thermally cycling between freezing winter nights and 140°F summer attic temperatures for decades. That stress cracks flex-duct liners and creates sag points where lint mats into something a vacuum attachment won’t touch. Call (737) 259-5752 and we’ll put a written estimate in front of you before any work starts.

Why CleanRun Air Duct Cleaning Round Rock Is Austin’s Preferred Dryer Vent Cleaning Company

We’ve served Austin homeowners since 2013, and our 52,000+ job record is built on two things customers can verify: a written price before work starts, and a documented photo record of every duct run when we leave. No manager-approval games, no “call for pricing” runaround. Haven Standard Clause 1 is the whole point.

Austin customers tell us the photo record is what sold them. They’d had “$79 whole-house” specials before, heard the shop-vac run for twenty minutes, and received nothing showing what was actually done. Our crews photograph the inside of every dryer run before and after, deliver those images as part of the standard job record, and leave the written 365-Day Done Right Promise on-site. If it’s not right, we make it right - backed in writing, not just stated in marketing copy.

Our technicians are background-checked, uniformed, and identified by name before arrival under Haven Standard Clause 3: Verified Crews. They carry professional-grade equipment from Rotobrush, Nikro, and Guardsman - brands you can look up independently before agreeing to any price. And every call is answered by a live person, 24/7, including scheduling and follow-up.

We know the local housing stock. The 1980s-2010s suburban buildout - Circle C Ranch, Steiner Ranch, Avery Ranch, the Slaughter Lane corridor - produced massive tracts of slab-foundation homes where all ductwork, dryer runs included, snakes through attics that punish flex materials with thermal cycling. Older central Austin neighborhoods like Hyde Park and Crestview contribute 1950s-1960s original sheet-metal systems that have never been professionally cleaned. We adjust our approach to what we actually find, not to a one-size-fits-all checklist.

Our Dryer Vent Cleaning Services in Austin

Dryer Vent Inspection

Every Austin job starts here. We run a camera through the full length of the vent run, from the transition behind your dryer to the exterior termination. In Steiner Ranch and Avery Ranch builds from the 2000s, we’re looking for the sagging flex runs that settle against attic trusses through years of thermal cycling, creating lint traps at the low point. In central Austin homes near Travis Heights, we’re checking whether the original sheet-metal run has separated at joints or been compromised by decades of vibration. The inspection takes 15-20 minutes, the images go into your job record, and the written scope and price follow before any cleaning begins.

Vent Cleaning (Lint Source Removal)

We use negative-pressure extraction - a sealed suction system that pulls lint and debris from the duct walls without blowing it into your laundry room or attic - combined with mechanical agitation from Rotobrush and Nikro equipment sized to the run diameter. In Austin’s climate, lint mats harder and deeper than in cooler, drier regions because the near-constant runtime keeps humidity cycling through the duct. A homeowner’s vacuum or a leaf blower from the big-box store won’t break that mat loose, and attempting it can compress the blockage further into a crushed or sagging run. We document the before condition, extract the full lint load, and photograph the cleared duct.

Lint Removal from Compressed or Disconnected Runs

This is where Austin’s housing stock shows its age. We were out in Steiner Ranch on a 2003 two-story where the homeowner’s dryer was taking two cycles to finish a load; our camera inspection showed the flex run sagging against an attic truss with a crushed elbow behind the laundry wall, and a lint mat packed against the transition at 3/4 blockage. After rerouting the run on a shorter, straighter path and capping the termination, dry time dropped back to a single cycle. The original problem wasn’t “dirty ducts” - it was a structural failure in the run that trapped lint against a degrading liner. We find this pattern repeatedly in Austin’s slab-on-grade suburban builds where attic trusses intersect long flex runs.

Vent Rerouting and Cap Replacement

When the camera shows a run with too many elbows, a crushed section, or a termination point that creates back-pressure, rerouting is often the only fix that lasts. We reroute on shorter, straighter paths using solid metal duct where code allows, seal all joints with mastic (not foil tape that degrades in attic heat), and install new wall caps with integrated bird guards. In Austin, we replace a lot of rusted-open or missing bird guards - the original caps on 1990s-2000s builds have often corroded through, letting nesting material in behind the lint mat. Every reroute job includes the full photo record and falls under the 365-Day Done Right Promise.

Bird Guard Installation

Austin’s bird pressure is year-round, and a missing or rusted guard turns your vent termination into a nesting site. We install Guardsman and Honeywell caps with integrated mesh screens sized to block birds and rodents without restricting airflow. The guard is photographed as part of the job record, and the installation is warrantied under the Done Right Promise.

Before

After

Trusted Brands We Service in Austin

Our equipment roster includes Rotobrush agitation systems, Nikro negative-pressure extractors, and Guardsman termination hardware - brands recognized in the duct cleaning trade and verifiable by any customer who wants to research before booking. We stock common cap sizes and guard replacements for Austin’s predominant builder-grade vent configurations, so most jobs complete in a single visit without waiting on parts. For older central Austin homes with custom or obsolete sheet-metal fittings, we fabricate transitions on-site rather than forcing mismatched components into the run.

Common Dryer Vent Cleaning Problems We See in Austin Homes

• Flex runs compressed against attic trusses in slab-on-grade suburban builds. The sag traps lint at the low point, and the liner abrades against the wood through years of thermal cycling between freezing winter nights and 140°F attic summers. The homeowner notices longer dry times first; by the time they call, the mat is often packed solid against a cracked inner liner.
• Bird guards rusted open or missing at the exterior wall cap. Austin’s humidity and temperature swings corrode the thin metal on original builder caps. Nesting material gets in, and the lint behind it forms a hard mat that no homeowner vacuum can touch. We replace with corrosion-resistant Guardsman caps as part of the standard reroute or cleaning scope.
• Long, elbow-heavy runs in 1950s-60s central Austin homes. The original sheet-metal supply and return ducts in Hyde Park, Crestview, and similar neighborhoods were never sealed, and the dryer vent work often stalls until a source-removal pass actually gets the full lint pathway clean. We coordinate dryer vent cleaning with full duct inspection when the systems share attic space.
• Thermally degraded flex-duct liners releasing insulation fibers. Austin’s near-constant HVAC runtime means attic ductwork never really rests. In 1990s-2000s subdivisions, the inner liner of the dryer flex run has often cracked from thermal cycling, exposing the fiberglass insulation layer. Lint accumulates against that rough surface instead of a smooth wall, and fibers can migrate into the laundry room. Rerouting to solid metal is the permanent fix.

Pricing for Dryer Vent Cleaning in Austin, TX

We Also Serve Cities Near Austin

Our crews run daily to Austin and the surrounding communities: Pflugerville to the northeast, Cedar Park to the northwest, Manor to the east, and Round Rock to the north. Dispatch and scheduling are coordinated from our Austin office, and we carry the same equipment, pricing structure, and Haven Standard documentation to every job in the metro.

FAQs - Dryer Vent Cleaning in Austin